Welcome, Guest. Please login or register. - Did you miss your activation email?

Ebates Coupons and Cash Back
 

Author Topic: FS/FT VMOD-XL bottom feeder with extras...  (Read 4670 times)

Offline Vatic vapor

  • Assministrator
  • 1K Member
  • ******
  • Posts: 5098
    • View Profile
FS/FT VMOD-XL bottom feeder with extras...
« on: March 02, 2014, 01:37:22 PM »
Here's a really cool mod that's just sitting around. I have two of them, bought this for my wife but she doesn't like it.   It comes with 3 bottles, 1 siloh hybrid atty, 1 SS DT, new seal kit, 4 anodized cases with matching collars..( note the bottom picture ) The silver case has a few minor scratches and dings from being carried in a purse but still looks nice and works good. This mod works really well with an A7 rebuildable. I used it for a while this way.  I also have a new seal kit from vapage that Ill throw in.  I'm asking 125 OBO.  The cases alone are 25 bucks each. Trades welcome....would actually prefer a trade. I can toss in more things to sweeten the deal if needed.  No, I don't want a half eaten donut, jars of fingernail clippings, new button up shrits ( with or without sleeves ) or any amount of broken devices or used cartos. Ha ha ha in advance for the smartass comments that are sure to come....:D  Thanks a lot for looking.






Considering a "Vatic" is named after Vatic, I'd say Vatic.

Offline Sedateme

  • Cunt Puntee #1
  • Administrator
  • 1K Member
  • *****
  • Posts: 2690
  • ɯoɔ˙uıdsʇɐǝɯ˙ʍʍʍ
    • View Profile
Re: FS/FT VMOD-XL bottom feeder with extras...
« Reply #1 on: March 02, 2014, 01:40:29 PM »
What's the wattage range on the pcb in that?
Fuck you and your piece of shit troll forum.

Online The REALac0j

  • 1K Member
  • ******
  • Posts: 3837
  • Listen to the voice of reason....
    • View Profile
Re: FS/FT VMOD-XL bottom feeder with extras...
« Reply #2 on: March 02, 2014, 01:46:04 PM »
Is it one of those feeder things? the bottle goes inside?
Doesnt seem that there is room for much of a battery.  I think I remember those from 2010 or so, but I dont remember the details.  Might be worth your time to fill in the blanks Vatic.  I dont want it in any case.

Offline Frank the Skank

  • Nipple Cunt Toast
  • 1K Member
  • ******
  • Posts: 1406
  • You may gershplunk my plumvargus.
    • View Profile
Re: FS/FT VMOD-XL bottom feeder with extras...
« Reply #3 on: March 02, 2014, 01:46:18 PM »
How many milliliters per squared inch do those bottles hold?
Наша шатия на протяжении многих парение приобрела заметный зрелость на сфере сборки мебели. Я выполняем свою работу неплохо да во срок. У всех наших мастеров нет переводу кадровый инструмент да опыт работы по сборке с 5лет.

Offline mj

  • Benevolent Dictator Twat
  • Administrator
  • 1K Member
  • *****
  • Posts: I am a geek!!
    • View Profile
Re: FS/FT VMOD-XL bottom feeder with extras...
« Reply #4 on: March 02, 2014, 01:47:31 PM »
Send me $20 and that thing and I'll sell it to a moron on ECF for you.
Fortune favors the bold.  Leave it all on red and hold my beer.

Offline jkmtwo

  • FAILevernoob
  • 1K Member
  • ******
  • Posts: 1997
    • View Profile
Re: FS/FT VMOD-XL bottom feeder with extras...
« Reply #5 on: March 02, 2014, 01:48:10 PM »
This thing can only be used with cartos and 510 atties, PASS

Offline Vatic vapor

  • Assministrator
  • 1K Member
  • ******
  • Posts: 5098
    • View Profile
Re: FS/FT VMOD-XL bottom feeder with extras...
« Reply #6 on: March 02, 2014, 02:07:26 PM »
This thing can only be used with cartos and 510 atties, PASS

Wrong. You can use anything 510 threaded on it. If you want to use an RBA, its gotta be unsealed. You could put a protank on it and used it but that would render the bottle feeding option useless.  I used it with an A7 rba for quite a while.

Here's a vmod with an A7


here's the inside with an 18500 and a kick.


I was going to try and wire in a kick to fit right under the bottle, like so you could slip the kick out and swap bottles.  I thought that would be really cool but I never got around to it.
Considering a "Vatic" is named after Vatic, I'd say Vatic.

Offline Cappadoc

  • 2 parts quack, 5 parts asshole
  • 1K Member
  • ******
  • Posts: 4456
  • Board certified in semicolonoscopy
    • View Profile
Re: FS/FT VMOD-XL bottom feeder with extras...
« Reply #7 on: March 02, 2014, 02:25:45 PM »
I bought 2 of these when they were 50% off, just like Vatic did.


They were good 2 years ago.
Nah, I live under a rock.  Doc lives in a cave way below the surface, under my rock.

Offline the wind

  • Newbie
  • *
  • Posts: 15
    • View Profile
Re: FS/FT VMOD-XL bottom feeder with extras...
« Reply #8 on: March 02, 2014, 06:54:13 PM »
I got one too along with a a7.What kind of adapter do i need?It looks like maybe two short adapters are needed?

Offline Vatic vapor

  • Assministrator
  • 1K Member
  • ******
  • Posts: 5098
    • View Profile
Re: FS/FT VMOD-XL bottom feeder with extras...
« Reply #9 on: March 02, 2014, 06:57:39 PM »
I got one too along with a a7.What kind of adapter do i need?It looks like maybe two short adapters are needed?

you don't need any adapter. you take off the ring that standard attys seat into and you don't use the collar. basically the atty holds the case on. it works well like that.
Considering a "Vatic" is named after Vatic, I'd say Vatic.

Offline Cappadoc

  • 2 parts quack, 5 parts asshole
  • 1K Member
  • ******
  • Posts: 4456
  • Board certified in semicolonoscopy
    • View Profile
Re: FS/FT VMOD-XL bottom feeder with extras...
« Reply #10 on: March 02, 2014, 06:58:10 PM »
I got one too along with a a7.What kind of adapter do i need?It looks like maybe two short adapters are needed?


A single regular 510 adapter.






ETA- Vatic is correct. Sorry.
Nah, I live under a rock.  Doc lives in a cave way below the surface, under my rock.

Offline Frank the Skank

  • Nipple Cunt Toast
  • 1K Member
  • ******
  • Posts: 1406
  • You may gershplunk my plumvargus.
    • View Profile
Re: FS/FT VMOD-XL bottom feeder with extras...
« Reply #11 on: March 02, 2014, 07:04:16 PM »
I've got the OG VMod, from back before all of this extra shit was even available.

I loaded it once, and realized that it was unregulated, and it's been back in its box ever since.

I've been meaning to sell it, or trade it, or whatever, then I realized... No one wants a VMod.


Наша шатия на протяжении многих парение приобрела заметный зрелость на сфере сборки мебели. Я выполняем свою работу неплохо да во срок. У всех наших мастеров нет переводу кадровый инструмент да опыт работы по сборке с 5лет.

Offline Vatic vapor

  • Assministrator
  • 1K Member
  • ******
  • Posts: 5098
    • View Profile
Re: FS/FT VMOD-XL bottom feeder with extras...
« Reply #12 on: March 02, 2014, 07:09:56 PM »
I've got the OG VMod, from back before all of this extra shit was even available.

I loaded it once, and realized that it was unregulated, and it's been back in its box ever since.

I've been meaning to sell it, or trade it, or whatever, then I realized... No one wants a VMod.

you have an old school vmod and you only used it once? Is it the 14500? what do you want for it?
Considering a "Vatic" is named after Vatic, I'd say Vatic.

Offline Frank the Skank

  • Nipple Cunt Toast
  • 1K Member
  • ******
  • Posts: 1406
  • You may gershplunk my plumvargus.
    • View Profile
Re: FS/FT VMOD-XL bottom feeder with extras...
« Reply #13 on: March 02, 2014, 07:55:27 PM »
you have an old school vmod and you only used it once? Is it the 14500? what do you want for it?

Lol, you're not serious...

Yes, it's the 14500.

You can have it for... well, $400. Or, a Mamu mod. Or, a ProVari. Or, a rim-job.
Наша шатия на протяжении многих парение приобрела заметный зрелость на сфере сборки мебели. Я выполняем свою работу неплохо да во срок. У всех наших мастеров нет переводу кадровый инструмент да опыт работы по сборке с 5лет.

Offline jkmtwo

  • FAILevernoob
  • 1K Member
  • ******
  • Posts: 1997
    • View Profile
Re: FS/FT VMOD-XL bottom feeder with extras...
« Reply #14 on: March 02, 2014, 08:04:34 PM »
Take the rim job, Franks rim tastes like fruity pebbles, mmmm delicio

SpaceCiggysForum

Re: FS/FT VMOD-XL bottom feeder with extras...
« Reply #14 on: March 02, 2014, 08:04:34 PM »

 



Enterprise © Bloc
Page created in 0.083 seconds with 18 queries.